-
What is Fusion Splicer And How to Splice Two Fibers?
May 22 , 2020
What is a fiber optical fusion splicer? Fusion splicer is to use high-temperature heat generated by electric arc and melt two optical fibers together at their end faces,to form single long fiber.More precisely, the fiber ends are initially brought in close contact,with a small gap in between. After heating them for a short while such that the surfaces melt, they are pushed together, such that the ...
Read More
-
Fusion Splicer Maintenance how to Clean its V-groove?
Jun 09 , 2020
Fusion splicer is a high precision equipment, it is very import to do the maintenance during daily work. V-groove is a V slot on the ceramic substrate of narrow width, easily to accumulate dust which will make the fiber move instability and cause a bad fusion, therefore, the V groove should be cleaned regularly. The following is the way of cleaning the V-groove
Read More
-
The Classifications of Optical Fiber Fusion Splicers
Jul 24 , 2020
Before the fusion of the optical fiber fusion splicer, according to the material and type of the optical fiber, the key parameters such as the pre-melting main melting current and time and the fiber feeding amount are set. During the welding process, the “V” shaped groove, electrode, objective lens, welding chamber, etc. of the welding machine should be cleaned in time. Observe the presence or abs...
Read More
-
How To Use The Optical Power Meter?
Aug 20 , 2020
Optical power meter refers to an instrument used to measure absolute optical power or the relative loss of optical power through a section of optical fiber. Simply put, it is to measure the attenuation of the optical signal after fiber transmission. Simple instructions: 1. When measuring the absolute optical power with the optical power meter, just connect the light source and look at the value in...
Read More
-
The maintenance and replacement of electrodes for optical fiber fusion splicer
Aug 28 , 2020
The electrode rod is an important part of the welding machine. Discharge welding is completed by the electrode rod. However, many people do not understand that the electrode rod is a consumable and needs to be replaced when it reaches a certain life span. Although the metal itself is hard and will not be worn by external forces, it needs to withstand high temperature discharge for a long time. At ...
Read More
-
Do you know what is fiber optic splicing?
Sep 18 , 2020
Fiber optic cable fusion splicing is a meticulous work, especially in the end face preparation, fusion splicing, coiling and other links. Fiber fusion splicing is to connect two-core fibers through a specific equipment fiber fusion splicer. 1. Preparation before optical fiber fusion splicing First prepare fiber stripper, cutter, fusion splicer, heat-shrinkable tube, alcohol cotton and ...
Read More
-
What is the difference between single-mode fiber and multi-mode fiber? Which one to choose?
Sep 21 , 2020
The first is to introduce the difference between multimode fiber and single mode fiber: Multimode fiber The optical signal in multimode fiber propagates through multiple channels; it is usually recommended to be used when the distance is less than miles. The effective distance of multimode fiber from transmitter to receiver is about 5 miles. The usable follow-up is also affected by the type and qu...
Read More
-
What is fiber to the home?(FTTH)
Oct 03 , 2020
What is fiber to the home (FTTH)? - Structure and components FTTH is one of the most important technologies for today and future’s networks, because not only it increases the access to bandwidth, but reduces equipment and maintenance cost while intensely improving Quality of Service. Projections specify that individual user Internet use will reach 100Mbps and will eventually go to 1Gbps. And fiber...
Read More
-
Cleaning of fusion splicer's microscopes (objective lenses)
Oct 23 , 2020
The fusion splicer uses the image processing system to observe the optical fiber. If the microscopic lens becomes dirty, it will affect the normal optical fiber observation, resulting in poor welding effect. Therefore, the lenses of the two microscopes should be cleaned regularly to keep the microlenses clean and tidy. The specific process is as follows: (1) turn off the power supply of the f...
Read More
-
How To Use Our Fiber Stripper CFS-3?
Oct 30 , 2020
The Operation Steps of Fiber Stripper CFS-3 1.Strip the fiber following steps 1 through 3 below. Step 1 : Insert fiber into the opening of the tool. Step 2 : Close the tool squarely around the fiber. Step 3 : Draw the tool along the fiber using thumb pressure while keeping the tool perpendicular to the fiber. 2.Clean the stripped fiber and terminate connection per connector splice or connector man...
Read More
-
The Basic knowledge of PON
Nov 11 , 2020
1.1 Basic principles of PON system PON (passive optical network) refers to an optical access network in which the ODN (optical distribution network) between OLT (optical line terminal) and ONU (optical network unit) all adopts passive equipment. PON is a point-to-multipoint (P2MP) optical access system, which can save fiber resources, ODN does not require power supply, user access is convenient, a...
Read More
-
Optical fiber alignment of optical fiber splicing machine
Nov 20 , 2020
Using optical fiber fusion machine for optical fiber fusion is one of the mainstream methods of optical fiber field termination, so there are many kinds of optical fiber fusion machine in the market, which is dazzling. How to choose a cost-effective optical fiber fusion machine has become a headache for many skilled workers. We know that the alignment accuracy of the optical fiber fusion machine i...
Read More
-
Precautions for Using Fusion Splicer in Winter
Dec 07 , 2020
For communication workers working outdoors, the working environment in winter is relatively harsh. Rain and snow, windy weather, and foggy weather all bring great challenges to welding. The staff is shivering in the cold outside. The fusion splicer is also prone to failure. Today, I will give you some tips for using the fusion splicer in harsh environments and the points that should be paid attent...
Read More
-
Do you know optical cable identifier?
Dec 11 , 2020
Introduction Optical cable identifier instrument, is based on the principle of optical fiber interference, through optical coherent demodulation to convert the tapping vibration signal of the optical cable into visual and audio signals, so as to accurately find and identify targets in various laying methods Optical cable. The fiber optic cable survey instrument can be used not only for the mainten...
Read More
-
The simple failure analysis and elimination of fusion splicer
Dec 23 , 2020
1. During the splicing process, the fusion splicer displays "fiber not found or the end face of the fiber is untidy". This is mainly caused by the surface of the optical system being contaminated. The protective glass (located under the electrode) should be cleaned with absolute alcohol, and the lens on the fiber cover should be cleaned at the same time. Wait until the alcohol is dry before procee...
Read More
-
What's fiber optic pigtail?
Jan 06 , 2021
A fiber pigtail is a single, short, usually tight-buffered fiber optic cable with a factory-installed connector on one end, and un-terminated fiber on the other end, making the maintenance more conveniently. Fiber optic pigtails are used to terminated fiber optic cables via fusion splicing or mechanical splicing as shown in the picture below. The end of the pigtail is stripped and fusion spli...
Read More
IPv6 network supported
English
русский
español
português
sales@seikofire.com
