-
How is the Submarine Cable Laid?
Jun 09 , 2020
The submarine communication cable is a wire wrapped with insulating material and laid on the seabed to complete the telecommunications transmission between countries. The first batch of submarine communication cables were used to supply telegraph communications, and later began to introduce telephone communications and Internet communications. Modern fiber optic cables also used fiber optic skills...
Read More
-
The maintenance and replacement of electrodes for optical fiber fusion splicer
Aug 28 , 2020
The electrode rod is an important part of the welding machine. Discharge welding is completed by the electrode rod. However, many people do not understand that the electrode rod is a consumable and needs to be replaced when it reaches a certain life span. Although the metal itself is hard and will not be worn by external forces, it needs to withstand high temperature discharge for a long time. At ...
Read More
-
Everything You Need to Know About Fiber Optics Cable
Sep 11 , 2020
In the recent years, fiber optics is steadily replacing copper wires. It is a better and apt means of transmitting communication signals. Today, fiber optics cable span across long distances between local phone systems. In addition, it also serves as the backbone for many networking systems including: Cable TV services University campus Office buildings Industrial plants Electric utility companies...
Read More
-
What is the difference between single-mode fiber and multi-mode fiber? Which one to choose?
Sep 21 , 2020
The first is to introduce the difference between multimode fiber and single mode fiber: Multimode fiber The optical signal in multimode fiber propagates through multiple channels; it is usually recommended to be used when the distance is less than miles. The effective distance of multimode fiber from transmitter to receiver is about 5 miles. The usable follow-up is also affected by the type and qu...
Read More
-
How To Use Our Fiber Stripper CFS-3?
Oct 30 , 2020
The Operation Steps of Fiber Stripper CFS-3 1.Strip the fiber following steps 1 through 3 below. Step 1 : Insert fiber into the opening of the tool. Step 2 : Close the tool squarely around the fiber. Step 3 : Draw the tool along the fiber using thumb pressure while keeping the tool perpendicular to the fiber. 2.Clean the stripped fiber and terminate connection per connector splice or connector man...
Read More
-
How to Use VFL
Nov 04 , 2020
VFL is very easy to use. The steps to use a VFL are provided as following: Step One: remove the plastic connector covers from both ends of the test fiber cable. Step Two: connect the fiber optic visual fault locator one end of the fiber. Press the tester button and observe that light emanates from the other end of the fiber. This gives a simple indication of the continuity of the fiber link. Step ...
Read More
-
Do you know optical cable identifier?
Dec 11 , 2020
Introduction Optical cable identifier instrument, is based on the principle of optical fiber interference, through optical coherent demodulation to convert the tapping vibration signal of the optical cable into visual and audio signals, so as to accurately find and identify targets in various laying methods Optical cable. The fiber optic cable survey instrument can be used not only for the mainten...
Read More
-
Why is My Internet So Slow? It Maybe Because of Network Cables!
Dec 29 , 2020
With the development of communication technology and the Internet, operators began to offer home broadband services of 200 Mbps, 500 Mbps and 1Gbps to ordinary consumers to meet the bandwidth needs of different users. However, when some users tested the network speed of computers, mobile phones and tablets connected through routers after the high-speed broadband service was opened, they found that...
Read More
-
What are the commonly used fiber optic tools？
Jan 21 , 2021
The gradual increase in the construction and maintenance of optical cables in the optical communication industry has prompted an increase in the demand for various optical fiber tools. Common optical fiber tools on the market include optical fiber strippers, optical cable strippers, and optical cable cutting shears. The purpose of these tools is also different, are you really familiar with them? K...
Read More
-
The Introduction of Underground Cable Fault Detector
Mar 09 , 2021
The underground pipeline detector can quickly and accurately detect the location, direction, depth, and the location and size of the damage point of the steel pipeline anticorrosive layer without damaging the ground cover. It is one of the necessary instruments for water supply companies, gas companies, railway communications, industrial and mining, infrastructure units to transform, repair, and s...
Read More
-
The correct use of fiber stripper
Mar 17 , 2021
Professional tools should be used when stripping the coating layer of the optical fiber. The most typical tool is the Fiber Stripper; it can thin the plastic outer layer outside the pigtail, and it can also strip the coating layer of the optical fiber. Pay attention to: 1. When peeling off the coating layer of the optical fiber, there should be no impurities in the small holes of the fiber strippe...
Read More
-
Why Do You Need OTDR Launch Box?
Mar 24 , 2021
Optical Time Domain Reflectometer (OTDR) is a mandatory fiber optic testing tool which uses light backscattering technologies to analyze optical fiber performance. An OTDR can test the light loss and locate the breaks, splices and connectors in fiber optic network. However, an OTDR has a “Dead Zone“ which can affect the test results. To overcome the limitation of this OTDR dead zone, an OTDR Launc...
Read More
-
Daily maintenance of fusion splicer
Apr 09 , 2021
In the fusion state, the optical fiber advancement stops and the machine does not perform fusion operation. The reason is that the V-groove is dirty and must be cleaned. After closing the windproof cover, the optical fiber will not push forward. Reason: 1. The bare optical fiber is placed too far from the electrode or beyond the electrode, please replay the optical fiber. 2. The objective lens has...
Read More
-
Why we need OCID?
Apr 23 , 2021
As demand for optical fiber increases day by day,the numbers of fibers in a single optical cable can be as many as 2096 individual fibers.As more fiber cables are buried underground,it becomes extremely dificult for the telecom engineers and technicians to manage the cables because cables may take different pathways, or be labeled incorrectly. As vast large number of optical cable being deployed b...
Read More
-
How to distinguish SM and MM fiber？
May 07 , 2021
According to the transmission mode of light in the fiber, it can be divided into: single-mode fiber and multi-mode fiber. The core diameter of the multimode fiber is 50-62.5μm, the outer diameter of the cladding is 125μm, the core diameter of the single-mode fiber is 8.3μm, and the outer diameter of the cladding is 125μm. The working wavelength of the optical fiber has short wavelength 0.85μm, lon...
Read More
-
The importance of underground cable fault detector
May 12 , 2021
Underground pipeline is an important part of urban infrastructure, urban underground pipelines, including water supply, drainage, gas, heat, telecommunications, electricity, industrial pipelines and other broad categories,Is to play a city function, the material basisto ensure that the city's economic and social health, coordinated development, known as the city's "blood vessels" and "nerves".At t...
Read More
IPv6 network supported
English
русский
español
português
sales@seikofire.com
