For communication workers working outdoors, the working environment in winter is relatively harsh. Rain and snow, windy weather, and foggy weather all bring great challenges to welding. The staff is shivering in the cold outside. The fusion splicer is also prone to failure. Today, I will give you some tips for using the fusion splicer in harsh environments and the points that should be paid attention to in the working process.

1. It is foggy in the morning in winter and the fusion splicer is prone to damp, so you should pay attention to it. At this time, the role of the tool box is reflected. If you have conditions, you can put a desiccant in the tool box instead of hanging one Bare metal breaks the world!

2. The temperature is low in winter and the battery is not durable. Just like a mobile phone, when the discharge is abnormal, you should pay attention to the discharge correction. The best way is to warm up the splicer for a few minutes before working, and then discharge it several times. Test for stable welding.

3. There are more windy weather and more dust in winter. When using the fiber cleaver, you must ensure that the end face is not contaminated, which will affect the quality of welding. You can wipe it with absolute alcohol before working. In addition, after preparing for fusion splicing and inserting the optical fiber, the windproof cover of the fusion splicer must not be opened to prevent dust from entering.

4. Perform a tensile test after welding, and be careful when raising the fiber to avoid fiber breakage due to low temperature or excessive tension.

5. After the work is over, clean the machine by the way and place it in a dry and ventilated place to avoid moisture.