-
Fusion Splicer Maintenance how to Clean its V-groove?
Jun 09 , 2020
Fusion splicer is a high precision equipment, it is very import to do the maintenance during daily work. V-groove is a V slot on the ceramic substrate of narrow width, easily to accumulate dust which will make the fiber move instability and cause a bad fusion, therefore, the V groove should be cleaned regularly. The following is the way of cleaning the V-groove
Read More
-
How To Use The Optical Power Meter?
Aug 20 , 2020
Optical power meter refers to an instrument used to measure absolute optical power or the relative loss of optical power through a section of optical fiber. Simply put, it is to measure the attenuation of the optical signal after fiber transmission. Simple instructions: 1. When measuring the absolute optical power with the optical power meter, just connect the light source and look at the value in...
Read More
-
Introduce of Optical Power Meters
Aug 31 , 2020
Introduce of Optical Power Meters An optical power meter (or laser powermeter) is an instrument for the measurement of the optical power (the delivered energy per unit time) in a light beam, for example a laser beam. Typically, it allows for power measurements only with a relatively low bandwidth, and will e.g. display only the average power when receiving a pulse&nbs...
Read More
-
Do you know what is fiber optic splicing?
Sep 18 , 2020
Fiber optic cable fusion splicing is a meticulous work, especially in the end face preparation, fusion splicing, coiling and other links. Fiber fusion splicing is to connect two-core fibers through a specific equipment fiber fusion splicer. 1. Preparation before optical fiber fusion splicing First prepare fiber stripper, cutter, fusion splicer, heat-shrinkable tube, alcohol cotton and ...
Read More
-
What is the difference between single-mode fiber and multi-mode fiber? Which one to choose?
Sep 21 , 2020
The first is to introduce the difference between multimode fiber and single mode fiber: Multimode fiber The optical signal in multimode fiber propagates through multiple channels; it is usually recommended to be used when the distance is less than miles. The effective distance of multimode fiber from transmitter to receiver is about 5 miles. The usable follow-up is also affected by the type and qu...
Read More
-
What is fiber to the home?(FTTH)
Oct 03 , 2020
What is fiber to the home (FTTH)? - Structure and components FTTH is one of the most important technologies for today and future’s networks, because not only it increases the access to bandwidth, but reduces equipment and maintenance cost while intensely improving Quality of Service. Projections specify that individual user Internet use will reach 100Mbps and will eventually go to 1Gbps. And fiber...
Read More
-
The Basic Principles of OTDR
Oct 15 , 2020
OTDR is called Optical Time Domain Reflectometer, which injects narrow light pulses into the fiber end face as a detection signal. When the light pulse propagates along the fiber, the backscattered part of Rayleigh scattering everywhere will continue to return to the incident end of the fiber. When the optical signal encounters a crack, Fresnel reflection will occur, and the back reflected light w...
Read More
-
How To Use Our Fiber Stripper CFS-3?
Oct 30 , 2020
The Operation Steps of Fiber Stripper CFS-3 1.Strip the fiber following steps 1 through 3 below. Step 1 : Insert fiber into the opening of the tool. Step 2 : Close the tool squarely around the fiber. Step 3 : Draw the tool along the fiber using thumb pressure while keeping the tool perpendicular to the fiber. 2.Clean the stripped fiber and terminate connection per connector splice or connector man...
Read More
-
The Basic knowledge of PON
Nov 11 , 2020
1.1 Basic principles of PON system PON (passive optical network) refers to an optical access network in which the ODN (optical distribution network) between OLT (optical line terminal) and ONU (optical network unit) all adopts passive equipment. PON is a point-to-multipoint (P2MP) optical access system, which can save fiber resources, ODN does not require power supply, user access is convenient, a...
Read More
-
The Notes When Using OTDR
Nov 26 , 2020
1. Simple judgment of fiber quality: Under normal circumstances, the slope of the main body of the light curve (single disk or several optical cables) tested by OTDR is basically the same. If the slope of a certain section is large, it indicates that the attenuation of this section is large; if the main body of the curve is of irregular shape, the slope fluctuation is large. Bending or arcing indi...
Read More
-
Do you know optical cable identifier?
Dec 11 , 2020
Introduction Optical cable identifier instrument, is based on the principle of optical fiber interference, through optical coherent demodulation to convert the tapping vibration signal of the optical cable into visual and audio signals, so as to accurately find and identify targets in various laying methods Optical cable. The fiber optic cable survey instrument can be used not only for the mainten...
Read More
-
What's fiber optic pigtail?
Jan 06 , 2021
A fiber pigtail is a single, short, usually tight-buffered fiber optic cable with a factory-installed connector on one end, and un-terminated fiber on the other end, making the maintenance more conveniently. Fiber optic pigtails are used to terminated fiber optic cables via fusion splicing or mechanical splicing as shown in the picture below. The end of the pigtail is stripped and fusion spli...
Read More
-
What are the main functional differences between OTDR and optical power meters?
Jan 13 , 2021
Anyone who does optical cable construction will often come into contact with optical power meter and OTDR (optical time domain reflectometer). Multi-users do not understand why it is necessary to use an optical power meter to test the optical loss after testing the OTDR. Doesn't OTDR have the function of testing fiber loss? And there are some differences in the main functions of the two devices? O...
Read More
-
What are the commonly used fiber optic tools？
Jan 21 , 2021
The gradual increase in the construction and maintenance of optical cables in the optical communication industry has prompted an increase in the demand for various optical fiber tools. Common optical fiber tools on the market include optical fiber strippers, optical cable strippers, and optical cable cutting shears. The purpose of these tools is also different, are you really familiar with them? K...
Read More
-
Four key factors in the purchase of Optical Power Meter
Jan 27 , 2021
There are many kinds of optical power meters, which one is suitable for us? in choosing optical power timing, we should also consider the following factors: (1) Application. Ordinary optical power meters can generally measure the absolute optical power of ordinary optical fiber links, but in some special applications, such as passive optical network (PON), coarse wavelength division multiplexing (...
Read More
-
The correct use of fiber stripper
Mar 17 , 2021
Professional tools should be used when stripping the coating layer of the optical fiber. The most typical tool is the Fiber Stripper; it can thin the plastic outer layer outside the pigtail, and it can also strip the coating layer of the optical fiber. Pay attention to: 1. When peeling off the coating layer of the optical fiber, there should be no impurities in the small holes of the fiber strippe...
Read More
IPv6 network supported
English
русский
español
português
sales@seikofire.com
