-
Fusion Splicer Maintenance how to Clean its V-groove?
Jun 09 , 2020
Fusion splicer is a high precision equipment, it is very import to do the maintenance during daily work. V-groove is a V slot on the ceramic substrate of narrow width, easily to accumulate dust which will make the fiber move instability and cause a bad fusion, therefore, the V groove should be cleaned regularly. The following is the way of cleaning the V-groove
Read More
-
The simple failure analysis and elimination of fusion splicer
Dec 23 , 2020
1. During the splicing process, the fusion splicer displays "fiber not found or the end face of the fiber is untidy". This is mainly caused by the surface of the optical system being contaminated. The protective glass (located under the electrode) should be cleaned with absolute alcohol, and the lens on the fiber cover should be cleaned at the same time. Wait until the alcohol is dry before procee...
Read More
-
How to clean the end face of optical fiber?
Feb 24 , 2021
Pentype One-Click Fiber Cleaner is loved by many users because of its convenient use. When using, you only need to insert the optical fiber cleaner into the connector, and then gently push it inward. When you hear the "Ka Ta" sound prompt, pull out the cleaner, and the cleaning work is completed. Therefore, it can also be called a one click optical fiber end face cleaner. In order to make it ...
Read More
-
How to clean the fiber end face?
Jul 02 , 2021
In the optical communication system, it was found that the optical loss doubled for no reason, even the optical signal was cut off, and the network connection failed. After investigation, it was found that the "culprit" was actually a large number of invisible particles, dust, and dust on the end face of the optical fiber. Dirt such as oil stains. Therefore, the cleaning of the fiber end face shou...
Read More
-
what's the difference of fiber connector?
Aug 17 , 2021
Given the variety of splice options available to fiber network planners today identifying the best connector for FTTH can be overwhelming. Consequently often not much thought is given to connector selection with choice driven by cost, availability or what’s been used before. However each connector has its own unique design and therefore, pros and cons. Over time or depending on project...
Read More
-
Do you know what kinds of optical fiber connectors there are?
Sep 10 , 2021
In the field of optical fiber, optical fiber interface (also known as optical fiber connector) is a common product, which is a detachable device between optical fiber and optical fiber, and connects the two ends of optical fiber. It is not only connected to the optical fiber, but also can be repeatedly plugged and unplugged, so it has also become a movable connector of the optical fiber. With the ...
Read More