-
How to solve these six problems encountered in the process of optical fiber fusion splicing?
Sep 29 , 2021
1. There are bubbles or cracks in the contacts during welding This situation may be due to poor fiber cutting, such as the end face is inclined, burrs, or the end face is not clean, and the fiber needs to be cleaned before the splicing operation; there is also a situation that the electrical electrode is aging and the electrode rod needs to be replaced. 2. The welding is too thick or the contact p...
Read More
-
What are reflective and non-reflective events in otdr?
Jan 21 , 2022
1. The height of each point in the OTDR curve represents the backscattered light intensity at that location. When looking at the OTDR curve, you can see that the reflected signal is raised in some places, as if the optical power at the back is stronger than the front, which is impossible. Generally, this situation is the backscattering peak caused by the Fresnel reflection at the splicing, breakin...
Read More
-
Ten reasons for excessive splicing loss of optical fiber
Feb 23 , 2022
1. Choose the wrong optical fiber splicing program; for example, misselect the single-mode splicing program to multi-mode. 2. The cutting angle of the end face of optical fiber is too large. 3. The optical system is dirty, mainly the reflector and objective lens. 4. V-shaped slot dirty, optical fiber pressure foot dirty. 5. The aging of the electrode leads to the weak discharge intensity, and the ...
Read More
-
FTTH network construction mainly provides services.
Mar 11 , 2022
1. Overall planning. With reference to the development requirements of the broadband access network in the Chinese market, and combined with the characteristics of the current GPON products and the specific operation of the current network deployment, it is recommended to adopt the FTTH construction mode, with the ability to provide ultra-high bandwidth for end users, and to bring functional...
Read More
-
What is the difference between fiber patch cords and pigtails?
Apr 01 , 2022
The difference between the two is that the pigtail is used to connect the optical cable and the jumper, and the jumper is to connect the pigtail and the terminal equipment. Optical fiber jumper is a jumper used from equipment to optical fiber cabling link, also known as optical fiber connector, which has a thicker protective layer and is generally used in the connection between optical transceiver...
Read More
-
How to reduce the fusion splicing loss?
Apr 28 , 2022
The size of the loss is a very important technical indicator of the optical fiber fusion splicer. The lower the loss, the higher the precision of the machine, which can support longer distance fusion splicing. The more perfect the fusion point, the longer the service life. 1. The fiber cleaver cutting angle of the fiber is very important. At present, most of the optical fiber fusion splicers are f...
Read More
-
The use of Seikofire fiber fusion splicer GPS function
May 13 , 2022
The use of Seikofire fiber fusion splicer GPS function. 1 download and install "Aika Life" APP on the mobile terminal. 2 Open the "Aika Life" APP, enter the ID address of GPS, enter the original password 123456, and click "Log in" 3 Click "Real-time tracking" to view the location of the device, the location of the mobile terminal and the device to. The straight line of the mobile phone terminal. 4...
Read More
-
What is the difference between the six motors and four motors of the fusion splicer?
Jun 07 , 2022
Maybe many friends' cognition of splicing machines and motors only exists in the more the better. This is true, but too general. Today we will talk about why six-motor splicing machine have lower losses and better performance. 1. Four motor fusion splicer, with two propulsion motors and two core-adjusting motors. The six-motor splicing machine also has two focus motors. The most intuitive view is ...
Read More
-
SeikoFire Six motors fusion splicer S8 New Arrival
Jul 13 , 2022
In 2022, SeikoFire Company grandly launched a new six-motor fusion splicing machine, SeikoFire S8 splicing macchine adopts the latest core alignment technology with auto focus and six motors, it is a new generation of fiber fusion splicer. It is fully qualified with 100 km trunk construction, FTTH project, security monitoring and other fiber cable splicing projects. The machine uses industrial qua...
Read More
-
Why can't see the reflector mirror on the fusion splicer now?
Aug 02 , 2022
With the continuous development of the optical fiber communication industry, the design of fusion splicers is also constantly improving. Among them, the structural changes of SeikoFire's splicing machine are very significant. It took the lead in carrying out some structural changes in the industry, such as: reflective mirrors. There are 2 traditional reflectors, which are installed in the windshie...
Read More
-
What is GPON and EPON
Nov 16 , 2022
Both gpon and epon belong to infinite light source network technology, referred to as PON, which includes gpon and epon. It is a high-tech technology for the development of fiber-to-the-home. The implementation of this technology can not only save backbone fiber resources and network levels, but also speed up network transmission and improve the pull-in capacity of broadband. It has more types of ...
Read More
-
The ARC discharge correction of Fusion Splicer
Aug 23 , 2023
The ARC discharge correction function of the fusion splicer is to judge the discharge intensity according to the axial deviation before and after the discharge of the welding part, and automatically correct it to the standard intensity, so as to achieve the standard of suitable discharge intensity and suitable discharge position, so as to achieve low loss and stable optical fiber splicing. When th...
Read More
-
The knowledge of optical fiber Identifier
Sep 14 , 2023
The optical fiber identifier is an essential tool for optical fiber maintenance. It is used for non-destructive optical fiber identification work and can detect any position of single-mode and multi-mode optical fibers. Main purpose The optical fiber identifier is an essential tool for optical fiber maintenance that is often required during maintenance, installation, cabling and recovery without i...
Read More
-
Two common optical fiber alignment methods of optical fiber splicing machine
Dec 07 , 2023
Optical fiber fusion machine is one of the mainstream methods of optical fiber field termination, so there are many kinds of optical fiber fusion machines in the market, which is dazzling. How to choose a cost-effective optical fiber fusion machine has become a headache for many skilled workers. We know that the alignment accuracy of the optical fiber fusion machine is very important to the qualit...
Read More
-
Factors to Consider While Choosing a Fusion Splicer
Jan 17 , 2024
Fusion splicer is an integral part of the fiber optic world, providing the means to connect two optical fibers end-to-end using heat. They are used to ensure that light passing through the fiber does not scatter or reflect back by the splice, thus ensuring minimal insertion loss. Choosing the right fusion splicers can be a difficult job, given the various factors that need to be taken into conside...
Read More
-
Big diameter fiber fusion splicer
Mar 28 , 2024
A big diameter fiber fusion splicer is a fiber optic machine used for joining or splicing large diameter optical fibers together. This kind of splicer supports various fiber diameters, such as 125μm, 150μm, 200μm, 360μm, and 400μm. a brief explanation of each diameter: 125μm: This is the most common diameter for single-mode and multimode fibers used in telecommunications networks and data transmis...
Read More
IPv6 network supported
English
русский
español
português
sales@seikofire.com
