-
What is Fusion Splicer And How to Splice Two Fibers?
May 22 , 2020
What is a fiber optical fusion splicer? Fusion splicer is to use high-temperature heat generated by electric arc and melt two optical fibers together at their end faces,to form single long fiber.More precisely, the fiber ends are initially brought in close contact,with a small gap in between. After heating them for a short while such that the surfaces melt, they are pushed together, such that the ...
Read More
-
Can 5G Save More Money in the Future?
May 22 , 2020
In recent years, the fiber optic network has developed rapidly. Under the influence of fiber splicing machines, most countries have successfully launched the overall layout of fiber optic networks. According to the relevant arrangement of the country, 5G commercial trials will be conducted in more than 20 cities throughout the country this year, and will officially begin commercializatio...
Read More
-
Do you know what is fiber optic splicing?
Sep 18 , 2020
Fiber optic cable fusion splicing is a meticulous work, especially in the end face preparation, fusion splicing, coiling and other links. Fiber fusion splicing is to connect two-core fibers through a specific equipment fiber fusion splicer. 1. Preparation before optical fiber fusion splicing First prepare fiber stripper, cutter, fusion splicer, heat-shrinkable tube, alcohol cotton and ...
Read More
-
Cleaning of fusion splicer's microscopes (objective lenses)
Oct 23 , 2020
The fusion splicer uses the image processing system to observe the optical fiber. If the microscopic lens becomes dirty, it will affect the normal optical fiber observation, resulting in poor welding effect. Therefore, the lenses of the two microscopes should be cleaned regularly to keep the microlenses clean and tidy. The specific process is as follows: (1) turn off the power supply of the f...
Read More
-
Optical fiber alignment of optical fiber splicing machine
Nov 20 , 2020
Using optical fiber fusion machine for optical fiber fusion is one of the mainstream methods of optical fiber field termination, so there are many kinds of optical fiber fusion machine in the market, which is dazzling. How to choose a cost-effective optical fiber fusion machine has become a headache for many skilled workers. We know that the alignment accuracy of the optical fiber fusion machine i...
Read More
-
The simple failure analysis and elimination of fusion splicer
Dec 23 , 2020
1. During the splicing process, the fusion splicer displays "fiber not found or the end face of the fiber is untidy". This is mainly caused by the surface of the optical system being contaminated. The protective glass (located under the electrode) should be cleaned with absolute alcohol, and the lens on the fiber cover should be cleaned at the same time. Wait until the alcohol is dry before procee...
Read More
-
What are the commonly used fiber optic tools？
Jan 21 , 2021
The gradual increase in the construction and maintenance of optical cables in the optical communication industry has prompted an increase in the demand for various optical fiber tools. Common optical fiber tools on the market include optical fiber strippers, optical cable strippers, and optical cable cutting shears. The purpose of these tools is also different, are you really familiar with them? K...
Read More
-
Four Basic Steps to Complete a Proper Fusion Splicing
Jul 15 , 2021
Step 1. Preparing the Fibers 1. Strip jacket and remove an adequate amount of jacket, usually 2-3 m, for splicing and dressing the buffer tubes and fibers in the splice closure. Leave the proper amount of strength members to attach the cable to the closure. Refer to the splice closure directions for lengths needed. Clean all water-blocking materials using appropriate cleaners. 2. Remove buffer tub...
Read More
-
Why the fiber end face always appears bad when the fusion splicer is splicing?
Aug 04 , 2021
1. The new end face is contaminated by debris, dust, etc. Solution: Do not let the cut fiber end face touch anything; 2. When cutting the optical fiber, the angle is too large. In this case, it may be a problem with the cleaver blade. Change a blade for an interview, or there may be debris in the fiber groove of the cleaver. Use a sharp object to clean the fiber groove. ； 3. There are gray and dar...
Read More
-
How to solve these six problems encountered in the process of optical fiber fusion splicing?
Sep 29 , 2021
1. There are bubbles or cracks in the contacts during welding This situation may be due to poor fiber cutting, such as the end face is inclined, burrs, or the end face is not clean, and the fiber needs to be cleaned before the splicing operation; there is also a situation that the electrical electrode is aging and the electrode rod needs to be replaced. 2. The welding is too thick or the contact p...
Read More
-
Ten reasons for excessive splicing loss of optical fiber
Feb 23 , 2022
1. Choose the wrong optical fiber splicing program; for example, misselect the single-mode splicing program to multi-mode. 2. The cutting angle of the end face of optical fiber is too large. 3. The optical system is dirty, mainly the reflector and objective lens. 4. V-shaped slot dirty, optical fiber pressure foot dirty. 5. The aging of the electrode leads to the weak discharge intensity, and the ...
Read More
-
How to reduce the fusion splicing loss?
Apr 28 , 2022
The size of the loss is a very important technical indicator of the optical fiber fusion splicer. The lower the loss, the higher the precision of the machine, which can support longer distance fusion splicing. The more perfect the fusion point, the longer the service life. 1. The fiber cleaver cutting angle of the fiber is very important. At present, most of the optical fiber fusion splicers are f...
Read More
-
The use of Seikofire fiber fusion splicer GPS function
May 13 , 2022
The use of Seikofire fiber fusion splicer GPS function. 1 download and install "Aika Life" APP on the mobile terminal. 2 Open the "Aika Life" APP, enter the ID address of GPS, enter the original password 123456, and click "Log in" 3 Click "Real-time tracking" to view the location of the device, the location of the mobile terminal and the device to. The straight line of the mobile phone terminal. 4...
Read More
-
What is the difference between the six motors and four motors of the fusion splicer?
Jun 07 , 2022
Maybe many friends' cognition of splicing machines and motors only exists in the more the better. This is true, but too general. Today we will talk about why six-motor splicing machine have lower losses and better performance. 1. Four motor fusion splicer, with two propulsion motors and two core-adjusting motors. The six-motor splicing machine also has two focus motors. The most intuitive view is ...
Read More
-
SeikoFire Six motors fusion splicer S8 New Arrival
Jul 13 , 2022
In 2022, SeikoFire Company grandly launched a new six-motor fusion splicing machine, SeikoFire S8 splicing macchine adopts the latest core alignment technology with auto focus and six motors, it is a new generation of fiber fusion splicer. It is fully qualified with 100 km trunk construction, FTTH project, security monitoring and other fiber cable splicing projects. The machine uses industrial qua...
Read More
-
Large Core Diameter Fiber Specialty Fiber Fusion Splicer
Sep 01 , 2022
The latest high-precision large core diameter optical fiber fusion splicer launched by SeikoFire Communication Technology Co., Ltd. has excellent workmanship and reliable quality. Widely used in optical communication fields such as telecommunications, mobile, China Unicom and radio and television.SeikoFire team waiting for your inquiry! Main feature: Real-time arc correction and manual correction ...
Read More
IPv6 network supported
English
русский
español
português
sales@seikofire.com
