-
What is Fusion Splicer And How to Splice Two Fibers?
May 22 , 2020
What is a fiber optical fusion splicer? Fusion splicer is to use high-temperature heat generated by electric arc and melt two optical fibers together at their end faces,to form single long fiber.More precisely, the fiber ends are initially brought in close contact,with a small gap in between. After heating them for a short while such that the surfaces melt, they are pushed together, such that the ...
Read More
-
Can 5G Save More Money in the Future?
May 22 , 2020
In recent years, the fiber optic network has developed rapidly. Under the influence of fiber splicing machines, most countries have successfully launched the overall layout of fiber optic networks. According to the relevant arrangement of the country, 5G commercial trials will be conducted in more than 20 cities throughout the country this year, and will officially begin commercializatio...
Read More
-
The Principle and Maintenance of Fiber Cleaver
Jun 09 , 2020
For fiber optics,clean and smooth end face is very important when splicing fiber optic cables.The fiber optic cleaver is a crucial tool for low-loss and low-reflectance fiber optic splices and terminations. The principle of a fiber cleaver 1. Fix fibers Open the body cover and put the striped fiber on the V-groove.Then close the holder cover. 2. Cut the knife mark on the fiber Slip the c...
Read More
-
Fusion Splicer Maintenance how to Clean its V-groove?
Jun 09 , 2020
Fusion splicer is a high precision equipment, it is very import to do the maintenance during daily work. V-groove is a V slot on the ceramic substrate of narrow width, easily to accumulate dust which will make the fiber move instability and cause a bad fusion, therefore, the V groove should be cleaned regularly. The following is the way of cleaning the V-groove
Read More
-
The Classifications of Optical Fiber Fusion Splicers
Jul 24 , 2020
Before the fusion of the optical fiber fusion splicer, according to the material and type of the optical fiber, the key parameters such as the pre-melting main melting current and time and the fiber feeding amount are set. During the welding process, the “V” shaped groove, electrode, objective lens, welding chamber, etc. of the welding machine should be cleaned in time. Observe the presence or abs...
Read More
-
Optical Fiber Cleaver D3 Instruction Manual
Aug 10 , 2020
I.Technical Specifications: Applicable range Single Core silex-fiber Cleaving Angle ≤0.5° Coating Diameter φ0.25＆φ0.9 Weight 260g Fiber Diameter 125μm Blade Life 36000 times Cleave Length 9~16mm(φ0.25) 10~16(φ0.9) Dimension 59mm(W)×55mm(D) ×49mm(H) II.Operation procedure: 1. Facing the blade shelf and open the big pressboard and small pressboard.(See figure 1) 2. Use the stripper to strip the coat...
Read More
-
How To Use OTDR?
Aug 14 , 2020
HOW TO USE OTDR? What is the most important thing to our OTDR? It must be looking at the graph and analyzing the curve. Then you can determine the condition of the line according to the curve. The operation mode and key function of each machine are basically different. First of all, we have to understand the basic operation and the key functions. We need to understand the most basic aspects of the...
Read More
-
How To Use The Optical Power Meter?
Aug 20 , 2020
Optical power meter refers to an instrument used to measure absolute optical power or the relative loss of optical power through a section of optical fiber. Simply put, it is to measure the attenuation of the optical signal after fiber transmission. Simple instructions: 1. When measuring the absolute optical power with the optical power meter, just connect the light source and look at the value in...
Read More
-
Everything You Need to Know About Fiber Optics Cable
Sep 11 , 2020
In the recent years, fiber optics is steadily replacing copper wires. It is a better and apt means of transmitting communication signals. Today, fiber optics cable span across long distances between local phone systems. In addition, it also serves as the backbone for many networking systems including: Cable TV services University campus Office buildings Industrial plants Electric utility companies...
Read More
-
Do you know what is fiber optic splicing?
Sep 18 , 2020
Fiber optic cable fusion splicing is a meticulous work, especially in the end face preparation, fusion splicing, coiling and other links. Fiber fusion splicing is to connect two-core fibers through a specific equipment fiber fusion splicer. 1. Preparation before optical fiber fusion splicing First prepare fiber stripper, cutter, fusion splicer, heat-shrinkable tube, alcohol cotton and ...
Read More
-
What is the difference between single-mode fiber and multi-mode fiber? Which one to choose?
Sep 21 , 2020
The first is to introduce the difference between multimode fiber and single mode fiber: Multimode fiber The optical signal in multimode fiber propagates through multiple channels; it is usually recommended to be used when the distance is less than miles. The effective distance of multimode fiber from transmitter to receiver is about 5 miles. The usable follow-up is also affected by the type and qu...
Read More
-
What is fiber to the home?(FTTH)
Oct 03 , 2020
What is fiber to the home (FTTH)? - Structure and components FTTH is one of the most important technologies for today and future’s networks, because not only it increases the access to bandwidth, but reduces equipment and maintenance cost while intensely improving Quality of Service. Projections specify that individual user Internet use will reach 100Mbps and will eventually go to 1Gbps. And fiber...
Read More
-
The Basic Principles of OTDR
Oct 15 , 2020
OTDR is called Optical Time Domain Reflectometer, which injects narrow light pulses into the fiber end face as a detection signal. When the light pulse propagates along the fiber, the backscattered part of Rayleigh scattering everywhere will continue to return to the incident end of the fiber. When the optical signal encounters a crack, Fresnel reflection will occur, and the back reflected light w...
Read More
-
Cleaning of fusion splicer's microscopes (objective lenses)
Oct 23 , 2020
The fusion splicer uses the image processing system to observe the optical fiber. If the microscopic lens becomes dirty, it will affect the normal optical fiber observation, resulting in poor welding effect. Therefore, the lenses of the two microscopes should be cleaned regularly to keep the microlenses clean and tidy. The specific process is as follows: (1) turn off the power supply of the f...
Read More
-
How To Use Our Fiber Stripper CFS-3?
Oct 30 , 2020
The Operation Steps of Fiber Stripper CFS-3 1.Strip the fiber following steps 1 through 3 below. Step 1 : Insert fiber into the opening of the tool. Step 2 : Close the tool squarely around the fiber. Step 3 : Draw the tool along the fiber using thumb pressure while keeping the tool perpendicular to the fiber. 2.Clean the stripped fiber and terminate connection per connector splice or connector man...
Read More
-
How to Use VFL
Nov 04 , 2020
VFL is very easy to use. The steps to use a VFL are provided as following: Step One: remove the plastic connector covers from both ends of the test fiber cable. Step Two: connect the fiber optic visual fault locator one end of the fiber. Press the tester button and observe that light emanates from the other end of the fiber. This gives a simple indication of the continuity of the fiber link. Step ...
Read More
IPv6 network supported
English
русский
español
português
sales@seikofire.com
