-
Four key factors in the purchase of Optical Power Meter
Jan 27 , 2021
There are many kinds of optical power meters, which one is suitable for us? in choosing optical power timing, we should also consider the following factors: (1) Application. Ordinary optical power meters can generally measure the absolute optical power of ordinary optical fiber links, but in some special applications, such as passive optical network (PON), coarse wavelength division multiplexing (...
Read More
-
Optical fiber will be the foundation of 5G network
Apr 01 , 2021
With the continuous changes in 5G wireless standards, what measures can network operators take to lay the foundation for 5G transmission networks? The good news is that at least the path of 5G at the physical layer is clear: optical fiber will be the foundation of 5G networks, and centralized RAN (C-RAN) will become the 5G network architecture. C-RAN was introduced through 4G (commercial de...
Read More
-
What's PON? What's PON optical power meter?
Apr 14 , 2021
PON (Passive Optical Network) The system is mainly composed of OLT (Optical Line Terminal), ONU (Optical Network Unit) and ODN (Optical Distribution Network) in the optical distribution network. Among them, the ODN does not include active equipment, and the OLT to the ONU is connected through an optical splitter to form a P2MP (point-to-multipoint) optical access system. PON can save optical fiber...
Read More
-
Why we need OCID?
Apr 23 , 2021
As demand for optical fiber increases day by day,the numbers of fibers in a single optical cable can be as many as 2096 individual fibers.As more fiber cables are buried underground,it becomes extremely dificult for the telecom engineers and technicians to manage the cables because cables may take different pathways, or be labeled incorrectly. As vast large number of optical cable being deployed b...
Read More
-
OTDR: General Questions
Apr 28 , 2021
Q: What do OTDRs test? A: OTDRs test the overall length, loss and optical return loss of fiber optic cables or networks. Additionally, they detect, locate, identify and measure optical components in installed networks including fusion splices, optical connectors and PON splitters as well as faults such as breaks or tight bends causing high loss. Q: Does it take training to use an OTDR? A: Each OTD...
Read More
-
NEW Fiber Identifier With VFL Function
Jun 07 , 2021
Upgraded high accuracy fiber identifier S506 integrates VFL and LED lighting function,It is one of the necessary tools for fiber maintenance.Fiber identifier can detect any position of the single mode and multi mode fiber. With the fiber identifier to identify the fiber on the line, you can identify the fiber power and 3 kinds of signal frequencies, and there will be a buzzer sound when identifyin...
Read More
-
What does AUTO mean in splicing mode of optical fiber fusion splicer？
Jun 18 , 2021
AUTO automatically recognizes the fiber type and corrects the discharge parameter mode in real time. SM is a single-mode fiber mode, NZ is a non-zero displacement dispersion fiber mode, and DS is a displacement dispersion fiber mode. Optical fibers for communication are generally SM (single-mode) or MM (multi-mode), of which SM is the majority. SeikoFire S5 optical fiber fusion splicer is mainly u...
Read More
-
Four Basic Steps to Complete a Proper Fusion Splicing
Jul 15 , 2021
Step 1. Preparing the Fibers 1. Strip jacket and remove an adequate amount of jacket, usually 2-3 m, for splicing and dressing the buffer tubes and fibers in the splice closure. Leave the proper amount of strength members to attach the cable to the closure. Refer to the splice closure directions for lengths needed. Clean all water-blocking materials using appropriate cleaners. 2. Remove buffer tub...
Read More
-
Why can't the OTDR test, how to test?
Jul 26 , 2021
For our communication, OTDR is the equipment that we usually have to get in touch with, so analyzing OTDR and detecting faults is a skill we need to learn So what aspects should we start with if the OTDR test fails? Next, the editor will take you to learn more about how to detect OTDR problems. Especially when it can't be tested. 1. The optical port is not plugged in properly. Our OTDR optical por...
Read More
-
The Most Import Thing You Need To Know About Fiber Optic Power Meters
Jul 30 , 2021
Optical Power Meters Here The fiber optic power meter is a special light meter that measures how much light is coming out of the end of the fiber optic cable. The power meter needs to be able to measure the light at the proper wavelength and over the appropriate power range. Most power meters used in datacom networks are designed to work at 850nm and 1300nn. Power levels are modest, in the range o...
Read More
-
Why the fiber end face always appears bad when the fusion splicer is splicing?
Aug 04 , 2021
1. The new end face is contaminated by debris, dust, etc. Solution: Do not let the cut fiber end face touch anything; 2. When cutting the optical fiber, the angle is too large. In this case, it may be a problem with the cleaver blade. Change a blade for an interview, or there may be debris in the fiber groove of the cleaver. Use a sharp object to clean the fiber groove. ； 3. There are gray and dar...
Read More
-
what's the difference of fiber connector?
Aug 17 , 2021
Given the variety of splice options available to fiber network planners today identifying the best connector for FTTH can be overwhelming. Consequently often not much thought is given to connector selection with choice driven by cost, availability or what’s been used before. However each connector has its own unique design and therefore, pros and cons. Over time or depending on project...
Read More
-
Introduction and use of the optical cable identifier
Sep 17 , 2021
When using the optical cable identifier, the user only needs to tap the optical cable lightly to easily find the target. The built-in system of the instrument can convert the tapping information into audio and video signals. In other words, we can hear or see the target optical cable. Where. The optical cable identifier completely replaces the previous cutting, bending, freezing and other methods....
Read More
-
How to solve these six problems encountered in the process of optical fiber fusion splicing?
Sep 29 , 2021
1. There are bubbles or cracks in the contacts during welding This situation may be due to poor fiber cutting, such as the end face is inclined, burrs, or the end face is not clean, and the fiber needs to be cleaned before the splicing operation; there is also a situation that the electrical electrode is aging and the electrode rod needs to be replaced. 2. The welding is too thick or the contact p...
Read More
-
Ten reasons for excessive splicing loss of optical fiber
Feb 23 , 2022
1. Choose the wrong optical fiber splicing program; for example, misselect the single-mode splicing program to multi-mode. 2. The cutting angle of the end face of optical fiber is too large. 3. The optical system is dirty, mainly the reflector and objective lens. 4. V-shaped slot dirty, optical fiber pressure foot dirty. 5. The aging of the electrode leads to the weak discharge intensity, and the ...
Read More
-
Difference between G652 fiber and G654 fiber
Mar 18 , 2022
G.652 optical fiber is the most widely used optical fiber. At present, except for fiber-to-the-home (FTTH) home optical cables, almost all optical fibers used in long-distance and metropolitan areas are G.652 optical fibers. From the perspective of light energy distribution, the optical signal in the single-mode fiber is not only transmitted in the core, but also in the cladding. In ...
Read More
IPv6 network supported
English
русский
español
português
sales@seikofire.com
