-
What can 5G bring to you in the optical communication 700MHz technology industry seminar?
Sep 26 , 2021
Background introduction. China Radio and Television Zeng Qingjun said that 5G NR broadcasting does not change the existing network transmission system, and uses the existing NR channel to enable all 5G terminals to receive 5G digital television, without worrying about traffic and network congestion. What is the 700MHz Technology Industry Application Seminar? With the continuous acceleration of 5G ...
Read More
-
How to solve these six problems encountered in the process of optical fiber fusion splicing?
Sep 29 , 2021
1. There are bubbles or cracks in the contacts during welding This situation may be due to poor fiber cutting, such as the end face is inclined, burrs, or the end face is not clean, and the fiber needs to be cleaned before the splicing operation; there is also a situation that the electrical electrode is aging and the electrode rod needs to be replaced. 2. The welding is too thick or the contact p...
Read More
-
The key points of fiber cleaver use
Feb 17 , 2022
Optical fiber cleavers are used in relatively harsh environments, so correct operation and maintenance are of great significance to ensure the service life of the cleaver and the quality of fiber cleaving. The D12 fiber cleaver of Shenhuo Seiko Nanjing Communication Technology Co., Ltd. is a compact and easy-to-operate fiber cleaver, which can be used to cut single-mode, multi-mode, dispersion and...
Read More
-
Ten reasons for excessive splicing loss of optical fiber
Feb 23 , 2022
1. Choose the wrong optical fiber splicing program; for example, misselect the single-mode splicing program to multi-mode. 2. The cutting angle of the end face of optical fiber is too large. 3. The optical system is dirty, mainly the reflector and objective lens. 4. V-shaped slot dirty, optical fiber pressure foot dirty. 5. The aging of the electrode leads to the weak discharge intensity, and the ...
Read More
-
Difference between G652 fiber and G654 fiber
Mar 18 , 2022
G.652 optical fiber is the most widely used optical fiber. At present, except for fiber-to-the-home (FTTH) home optical cables, almost all optical fibers used in long-distance and metropolitan areas are G.652 optical fibers. From the perspective of light energy distribution, the optical signal in the single-mode fiber is not only transmitted in the core, but also in the cladding. In ...
Read More
-
What is the difference between fiber patch cords and pigtails?
Apr 01 , 2022
The difference between the two is that the pigtail is used to connect the optical cable and the jumper, and the jumper is to connect the pigtail and the terminal equipment. Optical fiber jumper is a jumper used from equipment to optical fiber cabling link, also known as optical fiber connector, which has a thicker protective layer and is generally used in the connection between optical transceiver...
Read More
-
Working principle of Optical Fiber Fusion splicer.
Apr 12 , 2022
Optical fiber fusion splicer can be said to be an indispensable tool product in the field of communication engineering. for people who have had experience in communication engineering, they must know the operation of the fusion splicer like the back of their hand, but it is such a fiber fusion splicer. do you know how he works? Today we will introduce, if you understand, it may be helpful to the l...
Read More
-
How to reduce the fusion splicing loss?
Apr 28 , 2022
The size of the loss is a very important technical indicator of the optical fiber fusion splicer. The lower the loss, the higher the precision of the machine, which can support longer distance fusion splicing. The more perfect the fusion point, the longer the service life. 1. The fiber cleaver cutting angle of the fiber is very important. At present, most of the optical fiber fusion splicers are f...
Read More
-
The use of Seikofire fiber fusion splicer GPS function
May 13 , 2022
The use of Seikofire fiber fusion splicer GPS function. 1 download and install "Aika Life" APP on the mobile terminal. 2 Open the "Aika Life" APP, enter the ID address of GPS, enter the original password 123456, and click "Log in" 3 Click "Real-time tracking" to view the location of the device, the location of the mobile terminal and the device to. The straight line of the mobile phone terminal. 4...
Read More
-
OTDR test with light
May 24 , 2022
What is OTDR test with light? When testing with the wavelengths of 1310nm, 1490nm and 1550nm of common OTDR, it is necessary to require that there is no communication optical signal in the line under test. Forcing the test with light will burn out the internal detector of the OTDR. With light test, the OTDR can still complete the test without interrupting the signal light in the line during the te...
Read More
-
Introduction of Bluetooth connection of CT50 Fiber Cleaver
Jun 02 , 2022
CT50 fiber cleaver, as a sign of Fujikura, this cutter has a rare Bluetooth function. CT50's Bluetooth can connect the Fujikura fusion machine to the Fujikura phone APP "Splice +". The only Bluetooth-related function of the CT50 body is the switch Bluetooth, but after establishing a wireless connection with the welder or smartphone, you can use the welder or smartphone to change the settings. In o...
Read More
-
What is the difference between the six motors and four motors of the fusion splicer?
Jun 07 , 2022
Maybe many friends' cognition of splicing machines and motors only exists in the more the better. This is true, but too general. Today we will talk about why six-motor splicing machine have lower losses and better performance. 1. Four motor fusion splicer, with two propulsion motors and two core-adjusting motors. The six-motor splicing machine also has two focus motors. The most intuitive view is ...
Read More
-
Maintenance of Fiber Fusion Splicer
Jun 17 , 2022
Clean the fiber V-groove If there is dirt in the optical fiber V-groove, the reference position of the optical fiber will change and the fusion loss will increase. It is recommended to clean the V-groove regularly. Clean the V-groove with a cotton swab dipped in alcohol to remove oil stains and dust. If there is large dirt that is difficult to remove, push the cut bare optical fiber in one directi...
Read More
-
Introduction of SeikoFire Fusion Splicer
Jun 24 , 2022
Fiber optic fusion splicer is a equipment using an electric arc to melt two optical fibers together at their end faces and form a single long fiber. The resulting joint, or fusion splice, permanently joins the two glass fibers end to end, so that optical light signals can pass from one fiber into the other with very little loss. There are numerous well-known brands of fusion splicer such as Fujiku...
Read More
-
SeikoFire Six motors fusion splicer S8 New Arrival
Jul 13 , 2022
In 2022, SeikoFire Company grandly launched a new six-motor fusion splicing machine, SeikoFire S8 splicing macchine adopts the latest core alignment technology with auto focus and six motors, it is a new generation of fiber fusion splicer. It is fully qualified with 100 km trunk construction, FTTH project, security monitoring and other fiber cable splicing projects. The machine uses industrial qua...
Read More
-
The steps of fusion fiber
Jul 22 , 2022
1) peel the optical cable, be careful not to hurt the tube bundle, and take about 30mm in stripping length. 2) pass the optical fiber through the heat-shrinkable tube. The stripped cable is fragile and uses heat-shrinkable bushings to protect optical fiber connectors. 3) turn on the fiber fusion splicer power and choose the appropriate welding mode. There are two kinds of fiber fusion splicer powe...
Read More
IPv6 network supported
English
русский
español
português
sales@seikofire.com
