-
How To Use OTDR?
Aug 14 , 2020
HOW TO USE OTDR? What is the most important thing to our OTDR? It must be looking at the graph and analyzing the curve. Then you can determine the condition of the line according to the curve. The operation mode and key function of each machine are basically different. First of all, we have to understand the basic operation and the key functions. We need to understand the most basic aspects of the...
Read More
-
How To Use The Optical Power Meter?
Aug 20 , 2020
Optical power meter refers to an instrument used to measure absolute optical power or the relative loss of optical power through a section of optical fiber. Simply put, it is to measure the attenuation of the optical signal after fiber transmission. Simple instructions: 1. When measuring the absolute optical power with the optical power meter, just connect the light source and look at the value in...
Read More
-
The Basic Principles of OTDR
Oct 15 , 2020
OTDR is called Optical Time Domain Reflectometer, which injects narrow light pulses into the fiber end face as a detection signal. When the light pulse propagates along the fiber, the backscattered part of Rayleigh scattering everywhere will continue to return to the incident end of the fiber. When the optical signal encounters a crack, Fresnel reflection will occur, and the back reflected light w...
Read More
-
Do you know optical cable identifier?
Dec 11 , 2020
Introduction Optical cable identifier instrument, is based on the principle of optical fiber interference, through optical coherent demodulation to convert the tapping vibration signal of the optical cable into visual and audio signals, so as to accurately find and identify targets in various laying methods Optical cable. The fiber optic cable survey instrument can be used not only for the mainten...
Read More
-
Four key factors in the purchase of Optical Power Meter
Jan 27 , 2021
There are many kinds of optical power meters, which one is suitable for us? in choosing optical power timing, we should also consider the following factors: (1) Application. Ordinary optical power meters can generally measure the absolute optical power of ordinary optical fiber links, but in some special applications, such as passive optical network (PON), coarse wavelength division multiplexing (...
Read More
-
Precautions for using VFL
Feb 03 , 2021
Visual Fault Locator are also called VFL, pen-type red light sources, visible light detector, optical fiber fault detectors, optical fiber fault locators, etc. Most of them are used to detect fiber breakpoints. According to their shortest detection distance, they are divided into: 5Km, 10Km, 15Km, 20Km, 25Km, 30Km, 35Km, 40Km, etc. Driven by a constant current source, a stable red light is emitted...
Read More
-
The Introduction of Underground Cable Fault Detector
Mar 09 , 2021
The underground pipeline detector can quickly and accurately detect the location, direction, depth, and the location and size of the damage point of the steel pipeline anticorrosive layer without damaging the ground cover. It is one of the necessary instruments for water supply companies, gas companies, railway communications, industrial and mining, infrastructure units to transform, repair, and s...
Read More
-
The Introduce of Fiber Optic Microscope
Mar 10 , 2021
Fiber optic microscopes are used to inspect connectors to check the quality of the termination procedure and diagnose problems. A well made connector will have a clean, smooth, polished and scratch free finish. There is not be any signs ofcracks, chips or fiber not even with the ferrule front. The magnification for viewing connectors can be 30 to 400 power. Seikofire sells S620mini video optical f...
Read More
-
Why we need OCID?
Apr 23 , 2021
As demand for optical fiber increases day by day,the numbers of fibers in a single optical cable can be as many as 2096 individual fibers.As more fiber cables are buried underground,it becomes extremely dificult for the telecom engineers and technicians to manage the cables because cables may take different pathways, or be labeled incorrectly. As vast large number of optical cable being deployed b...
Read More
-
Why can't the OTDR test, how to test?
Jul 26 , 2021
For our communication, OTDR is the equipment that we usually have to get in touch with, so analyzing OTDR and detecting faults is a skill we need to learn So what aspects should we start with if the OTDR test fails? Next, the editor will take you to learn more about how to detect OTDR problems. Especially when it can't be tested. 1. The optical port is not plugged in properly. Our OTDR optical por...
Read More
-
What is OTDR Blind Area?
Aug 26 , 2021
Why does the blind area come up? The OTDR produces a blind area because the OTDR's detector is temporarily "blinded" by the high intensity Fresnel reflection light (mainly caused by the air gap between the OTDR connections). When the high intensity reflection is produced, the power of the photodiode is more than 4000 times higher than the backscatter power. Thus, the reflected light signal receive...
Read More
-
How to reduce the fusion splicing loss?
Apr 28 , 2022
The size of the loss is a very important technical indicator of the optical fiber fusion splicer. The lower the loss, the higher the precision of the machine, which can support longer distance fusion splicing. The more perfect the fusion point, the longer the service life. 1. The fiber cleaver cutting angle of the fiber is very important. At present, most of the optical fiber fusion splicers are f...
Read More
-
OTDR test with light
May 24 , 2022
What is OTDR test with light? When testing with the wavelengths of 1310nm, 1490nm and 1550nm of common OTDR, it is necessary to require that there is no communication optical signal in the line under test. Forcing the test with light will burn out the internal detector of the OTDR. With light test, the OTDR can still complete the test without interrupting the signal light in the line during the te...
Read More
-
What is the difference between the six motors and four motors of the fusion splicer?
Jun 07 , 2022
Maybe many friends' cognition of splicing machines and motors only exists in the more the better. This is true, but too general. Today we will talk about why six-motor splicing machine have lower losses and better performance. 1. Four motor fusion splicer, with two propulsion motors and two core-adjusting motors. The six-motor splicing machine also has two focus motors. The most intuitive view is ...
Read More
-
The introduction to OTDR begins with the cognitive curve
Aug 16 , 2022
OTDR is one of the most commonly used fiber optic measurement instruments and is widely used in the measurement, construction, maintenance and acceptance work of fiber optic cable projects. Although OTDR is widely used and is a common instrument for many installation and maintenance teams and engineering teams, but due to the OTDR curve expression is not intuitive enough, there are still many prac...
Read More
-
The RedLight Fiber Optic Power Meter and Its Advantages in FTTH Applications
Mar 12 , 2024
In the rapidly advancing world of fiber optics, the need for accurate and efficient testing tools has become crucial. One such tool that has gained significant popularity is the RedLight Fiber Optic Power Meter. With its comprehensive features and superior performance, this all-in-one device has become an indispensable asset in Fiber-to-the-Home (TH) installations. In this article, we will explore...
Read More
IPv6 network supported
English
русский
español
português
sales@seikofire.com
