-
The use of Seikofire fiber fusion splicer GPS function
May 13 , 2022
The use of Seikofire fiber fusion splicer GPS function. 1 download and install "Aika Life" APP on the mobile terminal. 2 Open the "Aika Life" APP, enter the ID address of GPS, enter the original password 123456, and click "Log in" 3 Click "Real-time tracking" to view the location of the device, the location of the mobile terminal and the device to. The straight line of the mobile phone terminal. 4...
Read More
-
OTDR test with light
May 24 , 2022
What is OTDR test with light? When testing with the wavelengths of 1310nm, 1490nm and 1550nm of common OTDR, it is necessary to require that there is no communication optical signal in the line under test. Forcing the test with light will burn out the internal detector of the OTDR. With light test, the OTDR can still complete the test without interrupting the signal light in the line during the te...
Read More
-
Introduction of Bluetooth connection of CT50 Fiber Cleaver
Jun 02 , 2022
CT50 fiber cleaver, as a sign of Fujikura, this cutter has a rare Bluetooth function. CT50's Bluetooth can connect the Fujikura fusion machine to the Fujikura phone APP "Splice +". The only Bluetooth-related function of the CT50 body is the switch Bluetooth, but after establishing a wireless connection with the welder or smartphone, you can use the welder or smartphone to change the settings. In o...
Read More
-
What is the difference between the six motors and four motors of the fusion splicer?
Jun 07 , 2022
Maybe many friends' cognition of splicing machines and motors only exists in the more the better. This is true, but too general. Today we will talk about why six-motor splicing machine have lower losses and better performance. 1. Four motor fusion splicer, with two propulsion motors and two core-adjusting motors. The six-motor splicing machine also has two focus motors. The most intuitive view is ...
Read More
-
Maintenance of Fiber Fusion Splicer
Jun 17 , 2022
Clean the fiber V-groove If there is dirt in the optical fiber V-groove, the reference position of the optical fiber will change and the fusion loss will increase. It is recommended to clean the V-groove regularly. Clean the V-groove with a cotton swab dipped in alcohol to remove oil stains and dust. If there is large dirt that is difficult to remove, push the cut bare optical fiber in one directi...
Read More
-
Introduction of SeikoFire Fusion Splicer
Jun 24 , 2022
Fiber optic fusion splicer is a equipment using an electric arc to melt two optical fibers together at their end faces and form a single long fiber. The resulting joint, or fusion splice, permanently joins the two glass fibers end to end, so that optical light signals can pass from one fiber into the other with very little loss. There are numerous well-known brands of fusion splicer such as Fujiku...
Read More
-
The impact of ONU low light on optical networks and testing
Jul 04 , 2022
When we browse the web at home when the broadband network speed is not stable, watching video suddenly lag, the game is playing when the excitement suddenly disconnected and other phenomena occur, it is likely that the home optical cat ONU weak light! What is called optical cat ONU weak light?ONU is what we commonly known as optical cat equipment, used to convert optical signals on the optical fib...
Read More
-
SeikoFire Six motors fusion splicer S8 New Arrival
Jul 13 , 2022
In 2022, SeikoFire Company grandly launched a new six-motor fusion splicing machine, SeikoFire S8 splicing macchine adopts the latest core alignment technology with auto focus and six motors, it is a new generation of fiber fusion splicer. It is fully qualified with 100 km trunk construction, FTTH project, security monitoring and other fiber cable splicing projects. The machine uses industrial qua...
Read More
-
The steps of fusion fiber
Jul 22 , 2022
1) peel the optical cable, be careful not to hurt the tube bundle, and take about 30mm in stripping length. 2) pass the optical fiber through the heat-shrinkable tube. The stripped cable is fragile and uses heat-shrinkable bushings to protect optical fiber connectors. 3) turn on the fiber fusion splicer power and choose the appropriate welding mode. There are two kinds of fiber fusion splicer powe...
Read More
-
Why can't see the reflector mirror on the fusion splicer now?
Aug 02 , 2022
With the continuous development of the optical fiber communication industry, the design of fusion splicers is also constantly improving. Among them, the structural changes of SeikoFire's splicing machine are very significant. It took the lead in carrying out some structural changes in the industry, such as: reflective mirrors. There are 2 traditional reflectors, which are installed in the windshie...
Read More
-
The introduction to OTDR begins with the cognitive curve
Aug 16 , 2022
OTDR is one of the most commonly used fiber optic measurement instruments and is widely used in the measurement, construction, maintenance and acceptance work of fiber optic cable projects. Although OTDR is widely used and is a common instrument for many installation and maintenance teams and engineering teams, but due to the OTDR curve expression is not intuitive enough, there are still many prac...
Read More
-
Large Core Diameter Fiber Specialty Fiber Fusion Splicer
Sep 01 , 2022
The latest high-precision large core diameter optical fiber fusion splicer launched by SeikoFire Communication Technology Co., Ltd. has excellent workmanship and reliable quality. Widely used in optical communication fields such as telecommunications, mobile, China Unicom and radio and television.SeikoFire team waiting for your inquiry! Main feature: Real-time arc correction and manual correction ...
Read More
-
How To Cut Fibers With Large Cladding Diameters?
Sep 08 , 2022
In order to meet the needs of industry and scientific research that pursue high precision and need to cut large diameter optical fibers, Seikofire launched the SH-D106 large diameter optical fiber cleaver. It has a wide range of applications in fiber lasers, fiber sensor manufacturing, project research and development in universities and related R&D institutions, submarine optical cables, nati...
Read More
-
Specialty Large Diameter Fibe Fusion Splicer
Sep 19 , 2022
Introduce Special fiber with large diameter is suitable for 850nm and 1300nm windows; low loss, high bandwidth; PCVD process ensures that the refractive index distribution is precisely controlled, heavy，Good renaturation; good mechanical properties and environmental properties. Other types of special fibers with large core diameters are shown in Table 6.1. Special optical fibers with large core di...
Read More
-
What color are the 4-core, 12-core, 48-core, 96-core and 144-core optical fiber cables sorted by?
Oct 26 , 2022
Many times, friends have left messages asking how the colors of optical fiber splices are sorted. This is still quite a lot in practical application. So today we will not talk about the principle, but simply use the picture and text to talk about the optical fiber fusion chromatography. In this issue, let's learn about it together. General sorting. The common optical fiber is 4-core, 12-core, 48-c...
Read More
-
What do "OLT", "ONU" and "PON" mean? What is the difference between the three?
Nov 08 , 2022
OLT: optical line terminal, a terminal device used to connect optical fiber trunks. ONU (Optical Network Unit) ， ONU is divided into active optical network unit and passive optical network unit. Generally, the equipment equipped with network monitoring including optical receiver, uplink optical transmitter and multiple bridge amplifiers is called optical node. The PON uses a single fiber to connec...
Read More
IPv6 network supported
English
русский
español
português
sales@seikofire.com
